Inductive factor 1 sensors
Available in:
66 versions
BES inductive factor 1 sensors from Balluff can be used wherever different types of metals must be uniformly identified with high precision. An all-around reliable sensor for recognizing all metals, without a reduction factor at the switching distance: ferrous and non-ferrous metals, steel, brass, aluminum etc. Additionally, they are magnetic-field-resistant, making them useable in areas with a strong electromagnetic field – such as welding plants. We also offer variants with PTFE coatings for protection against welding spatter.
Features
- High sensing distance without reduction factor for all metals
- Magnetic-field-resistant
- Installation in different metals possible
- High-precision and flexible use
- Various configurations and sizes
Enquiry about Inductive factor 1 sensors
Enter the security code shown above
| Order code | Dimension | Interface | Range | Switching frequency | Connection |
BES05Y2 |
Ø 12 x 65 mm | PNP normally open (NO) | 3 mm | 1500 Hz Measured at 2 mm, 24 V, 100 mA |
Connector, M12x1-Male, 3-pin
|
BES060C |
Ø 18 x 76 mm | PNP normally open (NO) | 12 mm | 2000 Hz |
Connector, M12x1-Male, 3-pin
|
BES05ZZ |
Ø 8 x 60 mm | PNP normally open (NO) | 3 mm | 900 Hz |
Connector, M8x1-Male, 3-pin
|
BES05ZY |
Ø 8 x 60 mm | PNP normally open (NO) | 1.5 mm | 900 Hz |
Connector, M8x1-Male, 3-pin
|
BES05WN |
Ø 18 x 66 mm | PNP normally open (NO) | 8 mm | 800 Hz |
Connector, M12x1-Male, 3-pin
|
BES05WM |
Ø 18 x 66 mm | PNP normally open (NO) | 5 mm | 800 Hz |
Connector, M12x1-Male, 3-pin
|
BES05U4 |
Ø 12 x 65 mm | PNP normally open (NO) | 2 mm | 800 Hz |
Connector, M12x1-Male, 3-pin
|
BES05WC |
Ø 12 x 65 mm | PNP normally open (NO) | 4 mm | 800 Hz |
Connector, M12x1-Male, 3-pin
|
BES05Y1 |
Ø 18 x 66 mm | PNP normally open (NO) | 5 mm | 1000 Hz |
Connector, M12x1-Male, 3-pin
|
BES02YR |
Ø 8 x 49 mm | PNP normally open (NO) | 1.5 mm | 2000 Hz |
Connector, M8x1-Male, 3-pin
|
Related products
BALLUFF
BALLUFF
BALLUFF
BALLUFF