OMRON

Motion, Logic and Vision in one

Ideal for large-scale, fast, and highly-accurate control with up to 256 axes.

Ultimate AI edge controller born from the fusion of AI and control

The Controller can be directly connected to a database. No special Unit, software, nor middleware is required.

Powerful power supply unit to supply stable power to the NX-series controller.

A wide range of digital I/O units from general purpose use to high-speed synchronous control

Provides simplicity and flexibility in connecting serial devices to EtherCAT

High-speed counter unit ideal for edge control, achieving high-speed response and high-resolution performance

More precise timing control by synchronizing the position data with the EtherCAT® Distributed Clock

Synchronous Serial Interface (SSI) to connect external axes to the Sysmac system

[For NX502] EtherNet/IP unit with two 1 Gbps ports for high-speed, high-capacity communications

IO-Link makes sensor level information visible and solves the three major issues at manufacturing sites! The screwless clamping terminal block reduces wiring work.

Positioning control with pulse outputs to command stepper motor drives and other pulse input motor drives

Build a cost saving weighing/ measurement system by using load cells.

Build a simple and flexible safety system

Integrate safety into ultra-flexible, ultra-high-speed machine automation and build a distributed safety system

Standard and high-speed, high-precision temperature measurement and control

RFID V680 communications units create faster and more consistent field networks, supports controller distribution, and enables better traceability

Up to ten EtherNet/IP networks, ideal for large-scale systems

Optimize Control by Detecting Status Changes Easily Satisfy Both Productivity and Quality

The simplest way to integrate safety into ultra-high-speed machine automation - Bring safety to your production site

Power Supply Unit, Power Connection Unit, and FG Terminal Expansion Unit for NX-Series

Combining Space-Saving Design and Advanced Temperature Controllability

Analog inputs and outputs to meet all machine control needs, from general purpose to high-speed synchronous control

Simultaneous sampling of 4 channels with sampling times down to 5 μs

Consistent Microsecond Throughput: Models with Direct Conversion Join the Lineup. This unit is available for CJ/NJ controller.

New Controller Link Units, Now with 4,000 Send Words

NJ/CJ-series CompoNet Master Units Increase the Range of Applicability of Sensors and Actuators.

High-Speed, Flexible Control With A Wide Array of Features. This unit is available for CJ/NJ controller.

Smallest in the Industry! A DeviceNet Unit for the CJ Series that Boasts Industry-leading Performance and Functions

Hi-speed I/O link based on EtherCAT

EtherNet/IP unit with tag data link capacity of 180,000 words or more

Connect to Multivendor Controller Networks

Expand CJ/NJ-series with These Units

A wide range of CJ series input units are available featuring high-speed input and suitability for various applications. This unit is available for CJ/NJ controllers.

Capture Input Signals Shorter Than the Cycle Time. This unit is available for CJ/NJ controller.

High-speed Starting of I/O Interrupt Tasks. Use Up to Two Units for a Total of Up to 32 Interrupt Inputs. This unit is available for CJ/NJ controller.

A Wide Range of Basic Mixed I/O Units for Different Applications and Wiring Methods. This unit is available for CJ/NJ controller.

High-speed, High-precision positioning with 1, 2, or 4 axes

Motion Control Capabilities with Unit Synchronization and Even Higher Speed

Decrease TCO with Simple Operation, Reduced Wiring, Batch Settings, and Batch Management

Preeminent control performance and easy operation feature of EtherCAT improve the production efficiency.

A Wide Range of Basic Output Units for High Speed Output and Different Applications. This unit is available for CJ/NJ controller.

Equipped with the RUN output for checking the operation status, as well as the replacement notification function for easy maintenance. Lineup of five models including the AC power supply (25W).

A Single Unit Handling All Types of Inputs such as Temperature Sensor Inputs and Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5 V). This unit is available for CJ/NJ controller.

A Single Unit Handling All Types of Inputs such as Temperature Sensor Inputs and Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5 V)

This module is designed for use with any CPU unit belonging to Omron’s highly successful CJ1 series of programmable logic controllers.

PROFIBUS-DP master class one with support of DP-V1 data types.

PROFIBUS-DP I/O link unit

A Single Unit Handling All Types of Inputs such as Temperature Sensor Inputs and Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5 V)

The Serial Communications Units That Enable High-speed Connections with External Devices. This unit is available for CJ/NJ controller.

High-speed Collection of System Data

A Single Unit Performing All the Functions of 4 Temperature Controllers. This unit is available for CJ/NJ controller.

Communication Unit Dedicated for RFID V680 Allowing Direct Connection to OMRON PLC CJ/CS/NJ-series

Multi-axis control with a fastest servo cycle time of 25 μs/5 axes enables precision machining

This servo amplifier provides ultra-low latency servo control by taking signals directly from the controller and flexibility to connect to various motors and encoders

A controller with a width of only 28.6 mm provides complete control

Various encoder interfaces and high-speed multi-axis control by analog commands for precise machine operation

Supplies power to the CK3M Controller

Communications Cables, Terminating Resistance, Connector, Mounting Bracket, Special Tools

Simple and Intelligent Repeater Units Extend the Network

Visualize the actual worksite status! Simple and Intelligent I/O Slave Units.

Screw-less Terminal Wiring Further Reduces Wiring Work and Saves Labor at the Production Site.

With the relay terminal blocks, doubling up wires on terminals is not necessary! Smart Slave Units with Easy-to-understand Wiring Locations with One Common for Every Point.

Industry-standard Sensor Connectors for Easy Connection to Pre-wired Sensors without Special Tools.

Convert to Smart for Smarter Processing! Simple and Intelligent Analog I/O Slaves

High-speed Transfer of Temperature Data with CompoNet. Enhanced Smart Functions.

Analog Slave Units with the Industry's Narrowest Width Help Save Space in Equipment and Panels

A vertical slave unit of little wiring and size

Thinnest in the industry! Ultimately little space and wiring are required.

Aggregation of multi-I/O points! A compact and little wiring slave with 32 points and MIL connector

CS-series CompoNet Master Units Increase the Range of Applicability of Sensors and Actuators.

The Next-generation Sensor Networking Units That Revolutionize the Workplace from Introduction and Startup though Operation

Motion, Logic, Safety, Vision and HMI in one

Sysmac solutions for every machine Controllers ideal for simple machines

Controller that covers functions and high-speed processing required for machine control and safety, reliability and maintainability that are he features of industrial controllers Ideal for small-scale control with up to 8 axes

Controller that covers functions and high-speed processing required for machine control and safety, reliability and maintainability that are the features of industrial controllers. Ideal for large-scale, fast, and high-accurate control with up to 64 axes.

The NJ-series Machine Automation Controller supports the Database Connection function. Machine data can be quickly stored in a database by connecting the Controller directly to the database.

The NJ501 SECS/GEM CPU Unit is a NJ-series machine automation controller, and has built-in the SECS/GEM communications functions which are the standards in the semiconductor industry. It is the high-performance controller that fuses machine control and host communications.

New controller that covers functions and high-speed processing required for machine control and safety, reliability and maintainability that are the features of industrial controllers provides robot control function. In addition to robot control, general motion control with up to 64 axes can be also performed.

Realize high-accuracy synchronization motion control (MC) and numerical control (NC) functions by ONE controller.

Integration of Logic, Motion, OMRON Robot and Kinematics in one CPU.

Powerful functionality in a compact design

Up to eight axes of control via EtherCAT

The future will be IT driven, we make you part of it

Powerful. Tough. Future-Proof.

Unlock reliability with NYE Basic Panel PC built to last

Very stylish, very industrial

Works great, looks great.

Expansion I/O Units make expansion easy!

A Communications Gateway that Connects Smart Sensors to CompoNet

The RS-232C port of the SYSMAC series can be changed into RS-422A/485 port.

The CS1W-CIF31 USB-Serial Conversion Cable connects CS/CJ/CP Series, C Series, CVM1/CV Series of OMRON PLC (Programmable Controller) or PT (Programmable Terminal) to a personal computer's USB port.

The NT-AL001 converts signals between RS-232C and RS-422A.

3 in 1 RFID: Antenna, Amplifier & Controller

RFID Systems with ISO/IEC 18000-3 (ISO/IEC15693) Compliance

3 in 1 UHF RFID System: Antenna, Amplifier & Controller

Line-up Ethernet I/F model newly. RFID system for Semiconductor applications, supports reading and writing TI (Texas Instruments) transponders

The Omron Sysmac HMI enables faster, more efficient control and monitoring - and a more natural, proactive relationship between operator and machine. Wide screen models: 7, 9, 12 and 15 inches

NA functions work on Windows