Magnetic field sensors for C-slot
Available in:
92 versions
Magnetic field sensors for C-slots can be mounted flush, so they are suitable for space-critical applications. Since all of them can be installed from above, they also fit in those places where groove ends are closed and lateral installation is not possible.
Balluff also offers extremely short configurations that perfectly fit every gripper and short-stroke cylinder. The sensors detect the piston position without contact through the cylinder walls. The system is adaptable for cylinders and grippers with both strong and weak magnets.
Features
- Reliable switching behavior
- Precise switchpoint
- Non-contacting and thus free from wear
- Impervious to contamination
- Low hysteresis
Enquiry about Magnetic field sensors for C-slot
Enter the security code shown above
| Order code | Housing material | Dimension | Interface | Connection |
BMF00NZ |
PA 12 | 3.6 x 2.9 x 24 mm | NPN normally open (NO) | Cable, 2 m, PUR |
BMF00P5 |
PA 12 | 3.6 x 2.9 x 24 mm | NPN normally open (NO) | Cable with connector, M12x1-Male, 4-pin, 0.3 m, PUR |
BMF00NY |
PA 12 | 3.6 x 2.9 x 24 mm | PNP normally closed (NC) | Cable, 2 m, PUR |
BMF00P1 |
PA 12 | 3.6 x 2.9 x 24 mm | PNP normally closed (NC) | Cable with connector, M8x1-Male, 3-pin, 0.3 m, PUR |
BMF00P7 |
PA 12 | 24 x 2.9 x 24 mm | PNP normally open (NO) | Cable with connector, M12x1-Male, 4-pin, 0.30 m, PUR |
BMF00NU |
PA 12 | 24 x 2.9 x 24 mm | PNP normally open (NO) | Cable, 2 m, PUR |
BMF00NW |
PA 12 | 24 x 2.9 x 24 mm | PNP normally open (NO) | Cable, 5 m, PUR |
BMF00P2 |
PA 12 | 3.6 x 2.9 x 24 mm | NPN normally open (NO) | Cable with connector, M8x1-Male, 3-pin, 0.3 m, PUR |
BMF00P8 |
PA 12 | 3.6 x 2.9 x 24 mm | NPN normally open (NO) | Cable with connector, M12x1-Male, 4-pin, 0.30 m, PUR |
BMF00P4 |
PA 12 | 3.6 x 2.9 x 24 mm | PNP normally closed (NC) | Cable with connector, M12x1-Male, 4-pin, 0.3 m, PUR |
Related products
BALLUFF
BALLUFF
BALLUFF
BALLUFF