TAKEX |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
|
| SSP-T200 SERIES |
| |
SLIM TYPE PICKING SENSOR |
| |
 |
| |
- ronization line is unnecessary.
- Robust metal enclosure and yet super slim type of slightly 13mm
- 2 groups of eye-friendly and large-sized job indicators
- Fault indicator
- Lighting operation is selectable
- Common use for NPN/PNP
NPN or PNP can be changed by a switch inside of the sensor unit, which ontributes to
reduction of product inventory.
|
| |
|
| |
Specifications |
| |
Model No.
|
Set model |
SSP-T205 |
SSP-T210 |
SSP-T213 |
SSP-T216 |
Transmitter |
SSP-TL205 |
SSP-TL210 |
SSP-TL213 |
SSP-TL216 |
Receiver |
SSP-TR205 |
SSP-TR210 |
SSP-TR213 |
SSP-TR216 |
Detection
|
Through-beam |
Range
|
2 m (Max.) |
Detection object
|
ø35 mm (Min.)Opaque object |
No. of optical axis
|
5 |
10 |
13 |
16 |
Detection width
|
100mm |
225mm |
300mm |
375mm |
Optical axis pitch
|
25 mm |
Power supply
|
12 to 24VDC ±10 %, Ripple 10 % (Max.) |
Current consumption(Max)
|
130mA |
140mA |
150mA |
155mA |
Output mode
|
NPN / PNP output selectableRating : Current 50mA (30VDC)Max. Residual voltage2V or less |
Operation mode
|
Light-on/Dark-on selectable |
Job indicator input
|
Non-contact or contact in put |
Response time
|
Standard
|
Light_on: 35 ms |
Light_on: 68 ms |
Light_on: 70 ms |
Light_on: 94 ms |
Dark_on: 25ms |
Dark_on: 42ms |
Dark_on: 42ms |
Dark_on: 58ms |
Interference protection |
Light_on: 45 ms |
Light_on: 84 ms |
Light_on: 88 ms |
Light_on: 116 ms |
Dark_on: 28ms |
Dark_on: 52ms |
Dark_on: 54ms |
Dark_on: 72ms |
Light source
|
Infrared LED, Wave-length 880nm |
Indicator
|
Transmitter |
Power indicator (Green LED) / Job indicator (Green LED) |
Receiver |
Stability indicator (Green LED)/ Dark indicator(Orange LED)Unstability indicator (Green LED)/ Job indicator(Green LED) |
Job indicator
|
Lights/Flickering selectable / Lighting speed switch (Fast/Slow) |
Short circuit protection
|
Built-in |
Interference protection
|
Built-in (within 2 sets) |
Material
|
Enclosure: Aluminum,Lens : Polycarbonate,End plate: Resin |
| Incidental function |
Automatic sensitivity correction function |
Wiring
|
Flying lead(Outer dia.F4.1) 2 m length Transmitter:0.2mm 2 × 3 cores(Gray) Receiver :0.2mm 2 × 4 cores(Black) |
Weight (Max.) |
Transmitter |
105g |
160g |
195g |
225g |
Receiver |
110g |
170g |
205g |
|
|
| |
|
| |
Environmental Characteristics |
| |
Ambient light |
10,000 lx (Max.) |
Operating temperature |
10 to 55°C (Storage: 25 to 70°C) |
Operating humidity |
35 to 85 %RH |
Enclosure protection |
IP 62 |
Vibration resistance |
10Hz to 55Hz, 1.5mm Amplitude,2 hours, X,Y and Z directions |
Shock resistance |
500 m/s 3 times X,Y and Z directions |
Dielectric strength |
1,000VAC for 1 minute |
Insulation resistance |
Min.20 MΩ (at 500VDC) |
|
|
