TAKEX |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
|
| F2R SERIES |
| |
FIBER OPTIC SENSORS |
| |
 |
| |
- Amazingly slim
(External dimensions 8mm0mm.length
73mm)
- The Amplifier can be used as if
it were cable
- 2 output types : NPN or PNP
- Fast response time(500,s max.)
|
| |
SPECIFICATIONS |
| |
|
NPN OUTPUT TYPE |
PNP OUTPUT TYPE |
Model |
F2R |
F2R-J |
F2RPN |
F2RPN-J |
Detection |
Through beam/Refrection(By fiver unit) |
Range |
It depends on Fiber unit |
Power supply |
12-24VDC ,10% Ripple 10% (Max.) |
Current consumpion |
25mA (Max.) |
30mA (Max.) |
Output mode |
NPN open collector |
PNP open collector |
Rating |
Sink current 100mA(30VDC) Max. |
Source current 100mA(30VDC) Max. |
Oparating mode |
| Light-On/Dark-On selectable |
L : Light-On |
| D : Dark-On |
|
Response time |
500,sec (Max.) |
Hysteresis |
10% (Max.) |
Light source |
Red LED Wave length : 660nm |
LED indicator |
OPL : Operation(Red) , STB : Stable(Green) |
Sensitivity adj. |
SENS : Built-in Potentiometer |
Short protection |
Built-in |
Connection |
Flying lead |
Connector * |
Flying lead |
Connector * |
cable |
F3.5 , 2m |
3P, 2.5m (option) |
F3.5, 2m |
3P, 2.5m (option) |
0.2sq f 3Wire |
Weight(Max.) |
40g |
65g |
40g |
65g |
Accessories |
1pc. Screwdriver for adjustment 1pc. Bracket for DIN rail (35mm width) |
|
| |
*: Need to order receptacle connector # F2-C3 |
| |
|
|
