• Technical Support
  • Fast Delivery
  • Biggest Saving
  • Money-back Guarantee
  • Product Warranty
  • Cheapest Price

TAKEX

> TAKEX Sensor
> Model List
> Fiber Optic Sensors
> F80R
> F70A
> F70
> F71
> K Series
> F70T
> F70V
> F71RAN
> F2R
> FLD1R
> CS-R80
> Fiber Optic Cables
> Accessories
> Photo Sensors
> ASG
> CN-T100MR
> CX
> DLZ
> GA
> GA-MT1R
> GKM (Oil Resistance Type)
> GKM (Pet Bottle Detection Type)
> GKM (Water Resistance Type)
> GM
> GNC
> LD-M/S
> LD-MX5R
> Middle-G
> Mini-G
> NE-DC
> NEF
> NT30F
> PF
> UM
> UM Side-on
> UX
> VS
> Light Curtain Sensors
> ESN
> SS10 SS20 SS40
> SS80
> SSF
> SSM-F
> SSP-S200
> SSP-T200
> SSC-T800

F80R SERIES
  FIBER OPTIC SENSORS
 

 

  • Simple operation and low cost design
  • “Long-distance” mode for dramatically increased detecting distance
  • “Received light” indication enlarged by about 8 times (compared with conventional Takex product)
  • Larger digital display allows for simple adjustment
  • Low power consumption achieved
  DIMENSIONS
 
 

 
OUTPUT CIRCUIT
 
  TYPE
 
Detection method/detecting
distance
Model
Operation mode
Output mode
Light source
NPN output
PNP output
Dependent on fiber optic cable
F80R
F80RPN
Light-ON/Dark-ON
selectable
Open collector
Red LED
 
  APPLICATIONS
 
 
 
     
 
     
  SPECIFICATIONS
 

Rating/performance

Type
NPNoutput
PNPoutput
Model
F80R
F80R
Power supply
12-24V DC ±10% / Ripple 10% or less
Power consumption
650 mW max. (25 mA max. at 24 V)
830 mW max. (32 mA max. at 24 V)
Output mode
NPN open collector
Rating: sink current 100 mA (30 VDC max.)
Residual voltage: 1 V or less
PNP open collector
Rating: source current 100 mA (30 VDC max.)
Residual voltage: 2 V or less
Operation mode
Light-ON/Dark-ON selectable with sliding switch
Timer : Off delay/disabled selectable with sliding switch
Delay time: 45 ms fixed
Response time (*1)
High-speed mode: 190 μs s or less / Long-distance mode: 1.8 ms or less
Specfication Light source (wavelength)
Red LED (680 nm)
Indicator
Operation indicator: orange LED / Mode indicator: yellow LED / Teaching indicator: green LED
Display
Received light level: 4 digits in orange LED (0-8000)
Switch
Output mode selector switch × 1 / Timer selector switch: 1 /
Teaching and sensitivity adjustment push + 4-direction button switch × 1
Sensitivity setting

Full auto teaching / Auto teaching

Sensitivity adjustment function
Provided (manual sensitivity adjustment)
Protection circuit
Reverse connection protection / Short circuit protection /Serge absorption
Material
Polycarbonate
Wiring
Permanently attached cord (Outer dimension: dia.3.7) 0.2sq. 3 core 2m length
Mass
Approx. 60 g (including 2-m cord and mounting bracket)
Accessory
Mounting bracket / Operation manual
Environmental specification Ambient light
Illumination on light receiving surface: 3,500 lx (incandescent lamp)
Ambient temperature
1-5 adjacent units in operation: –25 - +55 °C / Over 5 adjacent units in operation: –25 - +50 °C
Storage: –40 - +70 °C (non-freezing)
Ambient humidity
35-85%RH (non-condensing)
Protective structure
IP40
Vibration
10-55 Hz / 1.5 mm amplitude / 2 hours each in 3 directions
Shock
500 m/s 2 / 3 times each in 3 directions
 

(*1) For initial setting and checking, output operation is disabled for about 1.5 seconds after power-up.
The operation mode factory setting is long-distance mode.