TAKEX |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
| > |
|
| SSP-S200 SERIES |
| |
Picking sensor |
| |
 |
| |
- Picking sensor for checking and instruction of removing parts from bin
- Thinness of 13mm achieved with rigid metal case
- Large work operation indicator is provided(Job light)
- Faulty work operation indicator is provided(Fault light)
- Retro/Diffuse mode in one sensor
|
| |
|
| |
Specifications |
| |
Models |
SSP-S204R(-PJ) |
SSP-S208R(-PJ) |
Detection |
Retro-reflective/Diffuse reflective |
Range
|
Retro-reflective (2m Max.) Diffuse reflective: 700mm (Cartridge paper 300mm × 300mm) 400mm (18% reflectivity gray card) |
No. of optical axis |
4 |
8 |
Detection width |
100mm |
225mm |
Power supply |
12 to 24VDC ±10 %, Ripple 10 % (Max.) |
Current consumption
|
68mA(12VDC) 42mA(24VDC) |
78mA(12VDC) 48mA(24VDC) |
Output mode
|
NPN / PNP output selectable Rating : Current 50mA (30VDC)Max. Residual voltage 2V or less |
Operating mode |
Normal open/Normal close selectable |
Job indicator input
|
Non-contact or contact input Operating voltage : NPN 2V or less/ PNP 4V or more |
Response time |
120ms or less |
Light source |
Red LED(Wave-length 640nm) |
Indicators
|
Sensitivity indicator (Green/Orange) / Operating indicator(Orange) Job indicator (Green)/ Fault indicator(Red) |
Job indicator |
Flickering |
Short circuit protection |
Built-in |
Material |
Enclosure: Aluminum, Lens : Polycarbonate, End plate: Resin |
Wiring
|
Flying lead (Outer dia.F4.1) 2 m length 0.2mm 2 ×4 cores(Black) (-J : M12 connector type) |
Incidental function |
Automatic initialization function/ Automatic re-initialization function |
Weight |
120g |
180g |
|
| |
|
| |
Environmental Characteristics |
| |
Ambient light |
10,000 lx (Max.) |
Operating temperature |
-10°C to +50°C (Storage:-25°C to +70°C) |
Operating humidity |
35 to 85 %RH |
Enclosure protection |
IP 62 |
Vibration resistance |
10Hz to 55Hz, 1.5mm Amplitude,2 hours, X,Y and Z directions |
Shock resistance |
500 m/s 3 times X,Y and Z directions |
Dielectric strength |
1,000VAC for 1 minute |
Insulation resistance |
Min.20 MΩ(at 500VDC) |
|
|
