GM-S, SP series
These products realizes miniaturization and weight reduction by structure analysis and adopting of the aluminum frame.
It realizes low noise by adoption RGC machining and grinding finish. (0.1–2.2kW).
GM-SP series complies with IE3 class of international standard IEC60034-30 (0.75kW or more).
GM-D, DP series
These products comply with the load condition of service factor 1.4, moreover realizes miniaturization and weight reduction.
This series correspond to large-scale distribution conveyance use (0.4–7.5kW).
GM-DP series complies with IE3 class of international standard IEC60034-30 (0.75kW or more).
GM-LJP series
This series is the large geared motor which is most suitable for transport of the conveyance of the heavy load.
These motors correspond to severe needs (11–37kW).
This product complies with IE3 class of international standard IEC60034-30.
GM-J2 series
This series is the small geared motor which is most suitable for transport of light load such as food.
This product facilitates speed correspondence by the wide range of gear ratio from 1/3 to 1/2400.
Achieves energy savings with a premium efficiency compliant with IE3
Achieves low noise and low vibration levels that are top class in the industry
These motors deliver low-noise operation through adoption of special precision RGC machining of the first gear and grinding finish of the second gear.
RGC: Round-bar Gear Cutting. RGC is a technique for gear cutting after induction hardening, by which high-hardness, high-precision gears can be produced with no hardening strain.
GM-S, SP Series
GM-S Series (for uniform loads)
GM-SP Series (for uniform loads)
GM-D, DP Series
GM-D Series (for medium loads)
GM-DP Series (for medium loads)
GM-LJP Series
GM-LJP Series (for medium loads)
GM-J2 Series
GM-J2 Series (for uniform loads)
Geared motor
Options
GL-80 | Mounting foot (for 25 W) |
---|---|
GL-90 | Mounting foot (for 40 to 90 W) |