Capacitive level sensors without media contact
Available in:
30 versions
Need to detect and monitor fill levels in containers, pipes, or tanks without contacting the media through non-metallic container walls? This is not a problem for our capacitive level sensors without media contact. These devices detect the fill level of liquids and bulk materials to deliver reliable results.
Available in a wide range of versions, these sensors are suitable for a variety of applications. Choose from compact and flat cylindrical, cubic, or disc configurations, pressure-rated versions, and a variety of plug and cable variants.
Equipped with our patented Smart Level technology, the capacitive sensors from Balluff compensate for moisture, foam, and adhesion of any kind – even through glass and plastic walls up to 10 mm thick. This makes the sensors ideal as fill level sensors for conductive media, guaranteeing you high application reliability.
Features
- For fill level detection of liquids and bulk materials
- Large selection of configurations and housing materials as well as cost-effective versions
- Easy adjustment and setup, also via IO-Link
- Patented Smart Level technology compensates for adhesion, moisture, and foam through glass and plastic walls up to 10 mm thick
Enquiry about Capacitive level sensors without media contact
Enter the security code shown above
| Order code | Dimension | Connection | Interface | Installation | Housing material |
BCS017L |
Ø 12 x 60 mm | Connector, M12x1-Male, 4-pin | Push-pull normally closed (NC) | for flush mounting | 1.4404 stainless steel |
BCS017M |
Ø 12 x 60 mm | Connector, M12x1-Male, 4-pin | IO-Link 1.1 PNP normally open (NO) |
for flush mounting | 1.4404 stainless steel |
BCS00U6 |
40 x 40 x 10 mm | Cable with connector, M8x1-Male, 3-pin, 0.30 m, PUR | PNP normally open (NO) | for flush mounting | PBT |
BCS003K |
Ø 50 x 10 mm | Cable, 2.00 m, PVC | PNP/NPN normally open/normally closed (NO/NC) | for flush mounting | POM |
BCS000Y |
90 x 16 x 4 mm | Cable with connector, Special connector-Special connector, 2.00 m, PUR | Special interface see signal amplifiers (BAE) | flush with container outer wall | PC PUR |
BCS012C |
34 x 16 x 8 mm | Cable, 2.00 m, PUR | PNP normally closed (NC) | for flush mounting | PP |
|
BCS012H |
34 x 16 x 8 mm | Cable, 2.00 m, PUR | PNP normally open (NO) | flush with container outer wall | PP |
BCS003L |
Ø 50 x 10 mm | Connector, M8x1-Male, 3-pin | PNP/NPN normally open/normally closed (NO/NC) | for flush mounting | POM |
BCS00TR |
40 x 40 x 10 mm | Cable, 2.00 m, PUR | PNP/NPN normally open/normally closed (NO/NC) | for flush mounting | PBT |
BCS0134 |
40 x 40 x 10 mm | Cable with connector, M8x1-Male, 3-pin, 0.30 m, PUR | PNP normally open (NO) | flush with container outer wall | PBT |
Related products
BALLUFF
BALLUFF
BALLUFF
BALLUFF
BALLUFF
BALLUFF