Clog-resistant AJP series nozzles
฿0.00
| Pipe conn. size | R1/8, R1/4, R3/8, R1/2, R3/4, R1, or R1*1/2 |
|---|
| Spray angle | 75ﾟ, 80ﾟ, 85ﾟ, or 90ﾟ |
|---|
| Mean droplet diameter | 640–1,400 μm |
|---|
| Strainer | Not included |
|---|
| Standard pressure | 0.2 MPa |
|---|
| Spray capacity | 2.00–250 ℓ/min |
|---|
| Free passage diameter | 1.6–22.3 mm |
|---|
Features
• Full cone spray pattern with a round impact area and uniform distribution.
• Unique design to produce fine atomization by liquid impinging inside chamber without a whirler.
• No-whirler design with large free passage diameter minimizes clogging.
• Spraying axis 90ﾟ from the axis of the nozzle inlet.
• High chemical and wear resistant AJP-PPS series is available for spraying hydrochloric acid and other chemicals.
Note:
In extremely high or freezing temperatures, the orifice cap of the press-fit type (AJP size R1/8, R3/8, or R1/2) nozzle may fall off.
For use in such conditions, order the optional material S316 whose orifice cap is screwed in.
Do not use AJP size R1/8 in such environments. Screw-in orifice cap type is not available with the size R1/8.
Applications
• Cleaning: Pre-painting treatment, washing booths, machine parts, gas, incinerator fumes
• Cooling: Steel plates, copper pieces, gas
• Spraying: Aeration, foam breaking
• Others: Applications where re-circulated water is being used or clogging is a concern
Industries in which this nozzle is used
• Steelmaking
• Pollution control
Product specifications
| Outer dimensions |
Note:
In extremely high or freezing temperatures, the orifice cap of the press-fit type (AJP size R1/8, R3/8, or R1/2) nozzle may fall off.
For use in such conditions, order the optional material S316 whose orifice cap is screwed in.
Do not use AJP size R1/8 in such environments. Screw-in orifice cap type is not available with the size R1/8.
|
|---|
Related products
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI