Full Cone Spray CBIMJ series nozzles
| Spray angle | 20° (*1) | Spray capacity | 0.25–38.5 L/hr | Supply air type | Compressed air |
|---|
| Liquid feeding system | Liquid pressure | Mean droplet diameter | 20–100 μm | Air consumption | 2.6–91 L/min, Normal |
|---|
| Air pressure | 0.2–0.4 MPa | Free passage diameter | 0.7–2.0 mm (*2) |
|---|
Enquiry about Full Cone Spray CBIMJ series nozzles
Enter the security code shown above
Features
• Compact version of BIM series producing fine atomization. Space-saving design.
• Able to provide the lowest spray flow rate among all of our pneumatic spray nozzles.
• Clog-resistant design with a low parts count.
• Some CBIMJ models are available with a spray control adaptor, which can regulate spray ON/OFF with a built-in piston.
(See the PERFORMANCE DATA in the catalog below about the availability of adaptor for each model number.)
• CBIMJ series are full cone spray pneumatic nozzles producing fine atomization with a mean droplet diameter of 100 μm or less (*3).
• Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa.
• Spray angle of 20ﾟ.
*1) Spray angle measured at a compressed air pressure of 0.3 MPa and liquid pressure of 0.1 MPa.
*2) Free passage diameter of the nozzle orifice.
*3) Measured by Laser Doppler Method.
Applications
Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Industries in which this nozzle is used
• Steelmaking
• Electronics
• Paper & pulp
• Printing
• Food
• Automotives
Product specifications
| Structure | • Comprising four parts: Nozzle tip, core, cap, and adaptor. • Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference). • Liquid pressure type. |
||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Stainless steel 303 | ||||||||||||||||||||||||||||||||||||||
| Mass |
About 22 g |
||||||||||||||||||||||||||||||||||||||
| Outer dimensions |
 ①Tip Dimensions and Pipe connection sizes
• Appearance and dimensions may differ depending on nozzle codes and materials. Please contact us for details. |
||||||||||||||||||||||||||||||||||||||
Related products
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI