In-Line Flow Guns
In-Line Flow Guns
For precise control of low-viscosity sealants and adhesives
Handles:
- PVC sealers with glass or plastic filler
- Low to high abrasive fluids
- Waterborne or solventborne materials
- Most fluids up to 150,000 centipoise
Enquiry about In-Line Flow Guns
Enter the security code shown above
Features :
- Well-suited for dispensing onto horizontal surfaces
- Selectable trigger lock and hanger slot for operator convenience
- Accepts flanged or threaded tips for a variety of dispensing needs
- 204355 has rugged, lightweight design
- 240199 has lowest trigger force and weight in its class
Specifications :
| Ultra-Lite In-Line Flow Gun | |
| Maximum working pressure |
23.4 MPa, 234 bar
|
| Maximum temperature |
49°C
|
| Flow rate at 2000 psi (14 MPa, 138 bar)* |
4.5 kg/min
|
| Model 240–200: 154 oz/min |
4.4 kg/min
|
| Outlet port size |
1/4 npt(f) and flange
|
| Inlet port size |
1/4 npt(f)
|
| Dry weight |
325 gm
|
| Model 240–200: 11.6 oz |
325 gm
|
| Length |
15.0 cm
|
| Width |
6.6 cm
|
| Thickness |
2.16 cm
|
| Pressure vessel material |
Aluminum
|
| Pressure vessel ID |
6.4 mm
|
| Gun seat diameter |
3.2 mm
|
| Model 240–200: 0.203 in |
5.2 mm
|
| Needle seat type |
Model 240–199: Carbide ball
|
| Model 240–200: 7 Tapered carbide | |
| Inlet/outlet angle |
20°
|
| Trigger force – breakaway @ 1000 psi (7 MPa, 69 bar) |
0.73 kg
|
| Model 240–200: 3.8 lb |
1.72 kg
|
| Trigger force – breakaway @ 2000 psi (14 MPa, 138 bar) |
1.0 kg
|
| Model 240–200: 7.3 lb |
3.31 kg
|
| Trigger force – sustaining |
1.45 kg
|
| Model 240–200: 2.8 lb |
1.27 kg
|
| Wetted parts |
Aluminum, stainless steel, carbide, polyethylene, CV75
|
| CV75 is a registered trademark of the International Seal Co., Inc. | |
| * Flow rates were measured using PVC sealer dispensed through a 1/8 in. diameter orifice nozzle and z-swivel connected to inlet. Actual flow rates will vary depending on material type, fluid pressure, nozzle size, and system configuration. | |
Related products
GRACO
GRACO
GRACO
GRACO
GRACO