About TKK
Industrial Goods
Solutions
Quotation
Shop Industrial Products
News
Work with us
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Contact Us

GRACO Agitators

Agitators

Graco agitators for drums, pails, and pressure tanks

Agitators

Properly mixing material is the first step in industrial finishing success. Graco offers industrial agitators and agitator motors for drums, pails, mix tanks, and pressure tanks.
สนใจสินค้า
Type
Model :
Agitators
Screw diameter for both ends:

Agitators — industrial agitators for drums, pails, mix tanks, and pressure tanks, Electric agitators — back-geared drum and elevator; direct-drive flange and quick-clamp; pressure-tank 5/10/15 gal; UL and ATEX motors. Representative SKUs 25C451, 25C481, 25C463, 25C454, 25C464, 25C471, Radial-piston air-motor agitators — flange/cover, clamp/side, expanding blade, helix / Twistork, pressure tank, in-drum, heavy-duty back-geared. Representative SKUs 25C528, 25M481, 25C530, 25C536, 25N882, 26B630, Rotary-vane air-motor agitators — flange/cover, clamp, expanding blade, Twistork, heavy-duty in-drum / drum with elevator, pail cover. Representative SKUs 206758, 225831, 24C728, 24C729, 24C293, 231414, 231413, 238157, 226086, Options — optional 4.8:1 gear reducer; Intelligent Paint Kitchen (IPK) speed control; DataTrak; agitator speed controller (options, not models)

Applicable fluid:

Graco agitators are used to mix finishing materials in drums, pails, mix tanks, and pressure tanks. Recommended viscosity varies by model.

Features

Properly mixing material is the first step in industrial finishing success. Graco agitators are available with rotary-vane, radial-piston, and electric motors for drums, pails, mix tanks, and pressure tanks.

Which motor options are available?

Rotary vane air motors are known for durability and a low initial cost, and they run most efficiently at medium to high speeds. Radial-piston air motors install quickly, operate quietly, and do not require in-line air lubrication. According to GRACO, radial-piston air motors consume up to 80% less air than rotary vane motors. Actual savings depend on paint-system configuration and environmental factors.

Graco radial-piston agitator with flange mount

How do electric agitators perform?

Electric agitators are up to five times more efficient than pneumatic agitators. Speed remains constant regardless of the material level in the tank, and low-shear mixing is used to disperse particles without degrading the material. The electric motor is quiet, with a sound pressure level of less than 75 dBA. Back-geared drum and elevator systems, direct-drive flange and quick-clamp mounts, and pressure-tank assemblies (5, 10, and 15 gallon) are available, with UL-listed and ATEX-listed motors. An optional 4.8:1 gear reducer allows lower agitator speeds while maintaining motor cooling and adds torque for higher-viscosity materials. Typical published limits for back-geared electric units are 50 rpm and 3000 cP; for direct-drive electric units, 500 rpm (which may be limited by impeller size) and 300 cP.

Graco electric back-geared drum agitator with elevator

Which configurations and control options are available?

Radial-piston agitators are offered in flange/cover, clamp/side, expanding-blade, helix / Twistork, pressure-tank, in-drum, and heavy-duty back-geared configurations. Rotary-vane agitators are offered in flange/cover, clamp, expanding-blade, Twistork, heavy-duty in-drum, drum-with-elevator, and pail-cover configurations. Radial-piston models typically list a maximum recommended air pressure of 70 psi; viscosity ratings vary by model. Intelligent Paint Kitchen (IPK) integration can monitor and control agitator speed, and DataTrak can be added for speed monitoring and overspeed alerts. These are options, not standard on every unit.

Graco radial-piston agitator with a 5-gallon pressure tank

Models in the series

  • Agitators — industrial agitators for drums, pails, mix tanks, and pressure tanks
  • Electric agitators — back-geared drum and elevator; direct-drive flange and quick-clamp; pressure-tank 5/10/15 gal; UL and ATEX motors. Representative SKUs 25C451, 25C481, 25C463, 25C454, 25C464, 25C471
  • Radial-piston air-motor agitators — flange/cover, clamp/side, expanding blade, helix / Twistork, pressure tank, in-drum, heavy-duty back-geared. Representative SKUs 25C528, 25M481, 25C530, 25C536, 25N882, 26B630
  • Rotary-vane air-motor agitators — flange/cover, clamp, expanding blade, Twistork, heavy-duty in-drum / drum with elevator, pail cover. Representative SKUs 206758, 225831, 24C728, 24C729, 24C293, 231414, 231413, 238157, 226086
  • Options — optional 4.8:1 gear reducer; Intelligent Paint Kitchen (IPK) speed control; DataTrak; agitator speed controller (options, not models)

Related products

Why choose TKK for GRACO products?

TKK helps production and maintenance teams source, select and support GRACO equipment for fluid handling, finishing, sealing, dispensing and lubrication, from the first quotation to long after installation.

  • Official GRACO distributor, supplying genuine GRACO equipment through an authorized channel.
  • Competitive, value-focused pricing for single units and project quantities.
  • Extensive stock ready for prompt delivery, so you can keep your lines running.
  • A team of product specialists ready to advise on equipment selection, application and setup.
  • Dedicated, responsive after-sales service and technical support.

Contact TKK for model selection or a quotation for your machine.

Application