
ProMix PD, PD2K Manual and Automatic: MC1000 (Manual LP), AC1000 (Automatic LP), MC2000 (Manual HP), AC2000 (Automatic HP), PD2K Dual Mix: MC1002 (Manual DualMix LP), AC1002 (Automatic DualMix LP), PD3K / 3K+ Manual and Automatic, PD1K / 1K flow control Manual and Automatic: AC0500 (Automatic 1K, control only), AC0502 (Automatic DualMix 1K, control only), Acid Catalyst configurations, Layout options: Mix at the Belt, Mix at the Wall, Autospray; Custom Valve Mapping
ProMix PD handles epoxies, urethanes, metallics, non-metallics, AdPro, primers, top coats, clears, waterborne, and solventborne coatings. The viscosity range is 20 to 5000 cP.

ProMix PD is a positive-displacement (pump-based) electronic fluid-control platform for plural-component mixing. It provides true volumetric control and can operate in flow and pressure modes, with high- and low-pressure options.

An electrically driven dosing pump provides mix-ratio accuracy within ±1%. The 2K mix-ratio range is 0.1:1 to 50:1; the 3K range is 0.1:1 to 100:1. Low-pressure MC1000 and AC1000 systems have a maximum fluid working pressure of 300 psi (21 bar, 2.1 MPa); high-pressure MC2000 and AC2000 systems have a maximum of 1500 psi (105 bar, 10.5 MPa). Flow rate is 20 to 800 cc/min; 3K or 4K rates can be higher depending on pump size and ratio. Sound is below 75 dBA. The dosing pump can stall under pressure, supporting a smooth dispense; pumps do not need regulators in the mixed-material fluid stream.
A system can operate up to four pumps and track pot life for up to three spray guns. Standard PD2K configurations can manage up to 30 colors and four catalysts; Dual Mix maxima are 16 colors and four catalysts per mix unit; PD3K maxima are 30 colors and eight catalysts. Typically separated materials can run on the same system, including epoxies and urethanes, metallics and non-metallics, waterborne and solventborne, and 1K and 2K. Fluids handled also include AdPro, primers, top coats, and clears.
Mix-at-the-belt technology moves the mixing point closer to the gun, which decreases the zones that need to be flushed. Patented air/solvent chop allows preset flushing routines for different materials. Air/solvent chop gun flush is standard on all versions.
An intuitive control interface provides real-time system data, on-screen troubleshooting, and data via PLC or USB. Available PLC protocols include Modbus, Ethernet/IP, DeviceNet, and Profibus. Systems are offered in manual and automatic configurations and can be field-upgraded from a manual single-pump system to a multiple-pump automatic system. Software-token upgrades are available. Booth control, where fitted, can set recipe, pressure, and color change from inside the spray booth.

Named configuration groups include PD2K (manual and automatic, low and high pressure), PD2K Dual Mix (two guns in one booth, or two painters in two booths, on one system), PD3K / 3K+ (up to four pumps for three- or four-component processes), PD1K / 1K flow control, and Acid Catalyst hardware with 316 and 17-4 stainless steel catalyst sections. Layout options include Mix at the Belt, Mix at the Wall, and Autospray, with Custom Valve Mapping as an option.
TKK helps production and maintenance teams source, select and support GRACO equipment for fluid handling, finishing, sealing, dispensing and lubrication, from the first quotation to long after installation.
Contact TKK for model selection or a quotation for your machine.