Pro Xp Auto Waterborne Electrostatic Spray Guns
Pro Xp Auto Waterborne Electrostatic Spray Guns
Automatic Electrostatic Guns for Waterborne Applications
Ideal for high quality spraying of low or high pressure applications
Ideal for spraying waterborne materials with isolation systems, the Pro Xp waterborne gun is available in air spray and air-assist models.
Enquiry about Pro Xp Auto Waterborne Electrostatic Spray Guns
Enter the security code shown above
Pro Xp Air Spray: For low pressure spraying with an isolation system including the WB100.
Pro Xp Air-Assist: For high pressure spraying with an isolation system including the WB3000. Delivers a fine finish with an AEF or AEM tip.
Pro Xp Control Module
The Pro Xp Auto smart gun models connect right to the control module so you can see exactly how your gun is performing 24/7. With our control module, you can easily change the kV setting to optimize spray parameters for less touch up and a better finish quality on your parts.
Electrostic gun do not include a control module or fiber optic cable. Order items separately.
Features :
- Pro Xp Auto waterborne air-assist guns are ideal for high pressure spraying with an isolation system including the WB3000.
- Versatile product line gives you more models to choose from and greater spraying flexibility
- Back manifold is ideal for a variety of systems
- 60 kV power supply and internal power so there’s no electrical cord to worry about damaging or replacing
- Higher transfer efficiency equals less waste, saving you money on material
- Made in the USA
- Durable components reduce cost of ownership, supported by a three year warranty
Specifications :
| Pro Xp Auto Waterborne Air Spray Gun | |
| Maximum fluid working pressure |
0.7 MPa, 7 bar
|
| Maximum working air pressure |
0.7 MPa, 7 bar
|
| Maximum air pressure at gun inlet |
0.28 MPa, 2.8 bar
|
| Maximum fluid operating temperature |
48°C
|
| Paint resistivity range |
3 megohm/cm to infinity
|
| Short circuit current output |
125 microamperes
|
| Gun Weight (Approximate) |
1.2 kg
|
| Voltage Output | |
| Standard Models |
60 kV
|
| Smart Models |
30-60 kV
|
| Noise (dBa) | |
| Sound Power (measured per ISO Standard 9216) |
at 0.28 MPa, 2.8 bar: 90.4 dB(A)at 0.7 MPa, 7 bar: 105.4 dB(A)
|
| Sound Pressure (measured 1 m from gun) |
at 0.28 MPa, 2.8 bar: 87 dB(A)at 0.7 MPa, 7 bar: 99 dB(A)
|
| Inlet/Outlet Sizes | |
| Turbine air inlet fitting, left-hand thread |
1/4 npsm(m)
|
| Atomizing air inlet fitting |
5/16 in. OD nylon tube (8 mm)
|
| Fan air inlet fitting |
5/16 in. OD nylon tube (8 mm)
|
| Cylinder air inlet fitting |
5/32 in. OD nylon tube (4 mm)
|
| Fluid inlet fitting |
1/4-18 npsm(m)
|
| Materials of Construction | |
| Wetted Parts |
Stainless Steel; Nylon, Acetal, Ultra-High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Carbide, Polyethylene
|
Related products
GRACO
GRACO
GRACO
GRACO