|
| Home > ANYWIRE DB Slave Unit Bit Bus > A442 |
It corresponds to the small point decentralization and the miniaturization. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Kind | I/O terminal | I/O terminal | I/O terminal | ||
| Connected specification | E-CON connector | ||||
| I/O number | Input one point | Output two points | I/O one point for each | Output one point | Output two points |
| Product model | A442SB-01U-4 | A442SB-02U-4 | A442XB-02U-4 | A442PB-01U-4 | A442PB-02U-4 |
| Use power-supply voltage | DC24V+15～ -10% | ||||
| Input specification | Transistor input input resistance: 5.6kΩ The input current: At the time of 5.1 mAmin.OFF when it turns it on: 2.1mA max. The voltage level between input: 7Vmax at 16 Vmin. OFF when turning it on. |
- | |||
| Output specification | - | Transistor output output ON current: 100mA max . /road once Residual voltage: 1V max Leakage of current: 0.1mA max and electric strength: 30V |
|||
| Connecting cable | Transmission cable: 0.75mm2 Four line flat cable FK4-075-100(100m) I/O cable: 0.14-0.5mm2 |
||||
| Communication display | LED(Blink with the synchronized signal. ) | ||||
| State display | LED(The state of the input is displayed. ) | ||||
| Transmission scheme | Four-all pile in total frame cyclic method | ||||
| Synchro system | Frame/bit synchro system | ||||
| Transmission procedure | Special protocol(AnyWireBus) | ||||
| Transmission clock/distance | 62.5kHz/100m 31.3kHz/200m 15.6kHz/500m 7.8kHz/1km | ||||
| Connection status | Bus form | ||||
| Fan Inn | 1 | ||||
| Number of occupation data | One input bit | Two input bits | One bit of one input bit/output | One output bit | Two output bits |
| Use surroundings humidity | 10～ 90%RH(dewfall) | ||||
| Ambient temperature of use | 0～ +55℃ | ||||
| Preservation temperature | -20～ +75℃ | ||||
| Atmosphere | Causticity gas flammability gas | ||||
| Proof vibration | It conforms to JIS C 0040. | ||||
| Impact-proof | 100m/s2 | ||||
| Insulation resistance | Between the relay terminal and the outside box 20MΩ or more. | ||||
| Electric strength | Between the relay terminal and the outside box The AC1000V1 minute. | ||||
| Noise-proof | 1200Vp-p (pulse width 1μs) | ||||
| Material | Main body: PPE･V0 class | ||||
| Externals size[mm] | 75×24×16.4 | ||||
| Protection grade | IP20 | ||||
For more details and information, please visit this www.anywire.jp