| Kind |
Input |
| Connected specification |
Standard terminal stand |
Screw improvement type terminal stand |
| I/O number |
1 word (16 points) |
1 word (16 points) |
| Product model |
A40SW-01UD |
A40SW-01UD-1 |
| Use power-supply voltage |
DC24V+15%～-10% |
| Input specification |
Transistor input input resistance: 5.6kΩ and input current: 2.1mA max at 5.1 mA min. OFF when turning it on.
The voltage level between input: 7V max at 16 V min. OFF when turning it on. |
| Connecting cable |
Transmission cable: [Yoshin] 0.75-2.1mm2
I/O cable : [Yoshin] 0.32-2.1mm2
Acceptable [acchaku] terminal: Round terminal, 6mm or less in outside diameter of terminal Y, and hole diameter 3.2mm |
| Communication display |
LED(Blink with the synchronized signal. ) |
| State display |
LED(The state of the input is displayed. ) |
| Maximum electric power consumption |
5.6W |
5.6W |
| Transmission scheme |
Four-all pile in total frame cyclic method |
| Synchro system |
Frame/bit synchro system |
| Transmission procedure |
Special protocol(AnyWireBus) |
| Transmission clock/distance |
62.5kHz/100m 31.3kHz/200m 15.6kHz/500m 7.8kHz/1000m |
| Connection status |
Bus form |
| Fan Inn |
1 |
| Number of occupation data |
1 word |
| Use range humidity |
10～90%RH (dewfall) |
| Use range temperature |
0～ +55℃ |
| Preservation temperature |
-20～ +75℃ |
| Atmosphere |
Thing without causticity gas |
| Proof vibration |
It conforms to JIS C 0040. |
| Impact-proof |
100m/s2 |
| Insulation resistance |
Between the relay terminal and the outside box 20MΩ or more. |
| Electric strength |
Between the relay terminal and the outside box The AC1000V 1 minute. |
| Noise-proof |
1200Vp-p (pulse width 1μs) |
| Material |
Main body: PPE･V0 class |
| Externals size[mm] |
190×40×60 |
| Protection grade |
IP20 |
| Mass |
240g |
305g |
