Full Cone Spray SCBIMJ series nozzles
฿0.00
| Pipe conn. size | M3 depth 2.5 (Air inlet/pilot air), M3 depth 3 (Liquid) |
|---|
| Spray angle | 20°* | Spray capacity | 0.25–4.0 ℓ/hr | Supply air type | Compressed air |
|---|
| Liquid feeding system | Liquid pressure | Mean droplet diameter | 20–100 μm** | Air consumption | 2.6–12.4 ℓ/min, Normal |
|---|
| Air pressure | 0.2–0.4 MPa | Free passage diameter | 0.7–0.8 mm (Nozzle orifice) |
|---|
Features
• Full cone spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less.**
• Ultra-compact size. About 42 mm in total length including control adaptor.
• Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa.
• Spray angle of 20°.*
• Capable of spraying smallest flow rate among all of our pneumatic spray nozzles.
• Spray ON/OFF can be regulated by switching the pilot air ON/OFF (adaptor type SP) or by turning compressed air ON/OFF (adaptor type SN).
*Spray angle measured at compressed air pressure of 0.3 MPa and liquid pressure of 0.1 MPa.
**Mean droplet diameter measured by laser Doppler method.
Applications
Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, catalyst denitration, etc.
Industries in which this nozzle is used
• Steelmaking
• Electronics
• Paper & pulp
• Printing
• Food
• Automotives
Product specifications
| Structure | • Comprising seven parts: Nozzle tip, core, cap, connector, adaptor, packing, and spring cap. • Connecting adaptorｓ (spray ON/OFF control adaptors) are available from the type SP or SN. • Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference). • Liquid pressure type. |
||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | • Stainless steel 303 (Packing: FKM) | ||||||||||||||||
| Mass |
30 g |
||||||||||||||||
| Outer dimensions |
*1) Hole φ1 is for air relief.
*2) No pilot air for SN-type adaptor.
• Appearance and dimensions may differ depending on nozzle codes and materials. Please contact us for details. |
Related products
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI
IKEUCHI