PGM Metering System
PGM Metering System
Precision gear metering and dispense system for superior bead control
Boost productivity with PGM’s superior bead control and high flow rates
The Graco PGM Metering System delivers a smooth, consistent bead dispense – even with high-viscosity materials. And because it also provides higher flow rates, manufacturing facilities can dramatically improve production capacity and ROI.
Enquiry about PGM Metering System
Enter the security code shown above
Ideally suited for:
• Solar panel manufacturing
• Automotive windshield manufacturing
Handles a range of materials:
• Ambient, warm melt and hot melt materials to 400°F (204°C)
• Low to high-viscosity materials
• Unlimited volume
Features :
Improve your production capacity with PGM’s high flow rates
- Provides high flow rates:
- Up to 600 cc/min for ambient materials
- Up to 300 cc/min for high viscosity hot melt materials
- Smooth, consistent bead dispense – even at high flow rates
- Offers clean starts and stops for less material waste
- Bead control saves material costs
- Wrist-mountable design assures precise dosing control
- Touch-screen controls are easy to use, easy to integrate
Specifications :
| PGM | |
| Volume Repeatability |
+/- 1%
|
| Minimum Flow Rate |
6 cc/rev model: 30 cc/min, 20 cc/rev model: 40 cc/min
|
| Maximum Flow Rate |
6 cc/rev model: 8 cc, 20 cc/rev model: 10 cc
|
| Maximum Fluid Working Inlet Pressure |
10.3 MPa/103 bar
|
| Maximum Fluid Working Outlet Pressure |
17.2 MPa/172 bar
|
| Air Supply Pressure Range |
60–100 psi (filtration required)
|
| Fluid Filtration Required |
up to 200 mesh, depending on viscosity
|
| Viscosity Range of Fluids |
1,000 — 1,000,000 Poise
|
| Wetted Parts |
Stainless Steel, Tool Steel, Chrome, Carbide, Acetal Plastic, PTFE, Chemical Resistant O-Rings
|
| Power Requirements |
Full Load: 18.5A, Fuse Rating: 21A
|
| Power Supply Voltage Range |
240VAC, 50–60 Hz, single phase
|
| Sound Pressure Level at Maximum Flow Rate |
6 cc/rev model: 58 dB(A), 20 cc/rev model: 72 dB(A)
|
| Sound Power Level at Maximum Flow Rate |
6 cc/rev model: 68 dB(A), 20 cc/rev model: 79 dB(A)
|
| Operating Humidity Range |
10 – 90% non-condensing
|
| Overall Dimensions | |
| 6 cc/rev Model |
50.17 H x 23.83 W x 16.76 D mm
|
| 20 cc/rev Model |
55.25 H x 24.13 W x 22.6 D mm
|
| Controls |
76.2 H x 60.96 W x 30.48 D mm
|
| Weight | |
| 6 cc/revModel |
13.61 kg
|
| 20 cc/rev Model |
27.22 kg
|
| Controls |
45.36 kg
|
| Operating Temperature Range | |
| Control |
4 to 40 °C
|
| Heated Pump |
4 to 204 °C
|
| Ambient Pump |
4 to 49 °C
|
Related products
GRACO
GRACO
GRACO
GRACO
GRACO